Maf or MafLess- is 'VE' [ airmass table ] used during a 1/4 mile run ??
01-05-2005, 05:30 AM
#1
TECH Enthusiast
Thread Starter
iTrader: (248)
Join Date: Dec 2001
Location: Pittsburgh , PA
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
Maf or MafLess- is 'VE' [ airmass table ] used during a 1/4 mile run ?? Your in 'PE' mode 100% during a 1/4 mile run.
Just 'talking' AIRMASS here, fuel/spark being 'perfect'...
In a 'perfect' world with 'PE' set to 1.13 your 'commanded' AFR
is 13.0.
How does 'PE' make this 13.0 AFR happen during the 1/4 mile run ??
With a MAF, is it an airmass 'mix' of MAF/VE until 4K when the MAF is
100% of the airmass mix ??
Without a MAF, is it a 100% airmass of just the VE table the
whole 1/4 mile run ??
Dave
Just 'talking' AIRMASS here, fuel/spark being 'perfect'...
In a 'perfect' world with 'PE' set to 1.13 your 'commanded' AFR
is 13.0.
How does 'PE' make this 13.0 AFR happen during the 1/4 mile run ??
With a MAF, is it an airmass 'mix' of MAF/VE until 4K when the MAF is
100% of the airmass mix ??
Without a MAF, is it a 100% airmass of just the VE table the
whole 1/4 mile run ??
Dave
