Drag Racing Tech
Sponsored by:
Sponsored by:

Weight distribution ?

Thread Tools
 
Search this Thread
 
Old 01-05-2005, 01:34 PM
  #1  
9 Second Club
Thread Starter
iTrader: (8)
 
slowmaro98's Avatar
 
Join Date: Jun 2004
Location: Edmonton, Alberta
Posts: 152
Likes: 0
Received 0 Likes on 0 Posts

Default Weight distribution ?

I am looking for your advice. I am going to be mounting either 1 or 2 - 15 pound nitrous bottles in my car. The reason for 2 bottles is so that when I race I won't get any (or as little as possible) pressure drop in the n2o system. I want to run heaters on both bottles and T the bottles into the main supply line. Do you guy's agree with this or is one bottle going to give me enough consistency? Right now I notice that my full bottle drops about 100 - 150 psi on a 125 shot with no heater.

If i decide to go with 2 bottles , I was thinking of 3 different places to mount them.
1. Where the backs of the rear seat used to be.
2. directly above the gas tank on that flat area. (Where my subs used to be).
3. On the long side of the trunk area.

So for weight distribution sake, If I was going to mount 2 bottles where would be the most ideal spot. Reason I ask is because 2 bottles will probably add up to 50 - 60 pounds when full.
Old 01-05-2005, 01:50 PM
  #2  
TECH Resident
iTrader: (1)
 
TApimp's Avatar
 
Join Date: Dec 2001
Location: TX
Posts: 753
Likes: 0
Received 0 Likes on 0 Posts
Default

As long as your over or behind the back tires you should be fine. One bottle should be enough with a heater.




All times are GMT -5. The time now is 12:15 PM.