Higher Compression cheap??
#1
11 Second Club
Thread Starter
iTrader: (9)
Join Date: Dec 2004
Location: Euless-Grapevine TX
Posts: 1,982
Likes: 0
Received 0 Likes
on
0 Posts
Higher Compression cheap??
I have a set of 99 heads (853 castings) I sent to the local machine shop to get a new valves,valve job and ported..I wanted to know if there is any way to raise the compression without milling the heads. I have a pretty big cam and dont want any Piston to valve clearence issues. I have heard people talk about welding the chambers to lower the CC of them will this help..Any input will help..Thanx
#2
TECH Regular
iTrader: (3)
Join Date: Jun 2004
Location: alexandria, La
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by joseph785
I have a set of 99 heads (853 castings) I sent to the local machine shop to get a new valves,valve job and ported..I wanted to know if there is any way to raise the compression without milling the heads. I have a pretty big cam and dont want any Piston to valve clearence issues. I have heard people talk about welding the chambers to lower the CC of them will this help..Any input will help..Thanx