Painted Brake Calipers
#1
Staging Lane
Thread Starter
Join Date: Oct 2004
Location: ohio
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Painted Brake Calipers
This is a question for people who have painted their own calipers. When you prepared them for painting were you able to get 100% of the brake dust off or did you leave that last little bit that was stuck down in the texture? The only way I could get it all out was to practicaly polish the damn things with my dremel and that just seems like a lot of work. If anyone has any advice on what I should do I'd really appreciate it.
#2
TECH Veteran
Sometimes you have to work hard to get better results. I wouldn't be too worried about how hard it was. Sometimes that stuff is really embedded into the metal. That is really not uncommon.
#5
Registered User
iTrader: (127)
Join Date: Apr 2004
Location: Tallahassee
Posts: 1,985
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mark IXZD 150
Spray them down real good with brake cleaner. That stuff will degrease anything.