A3Z28

i'm looking to have something built, all motor short block (minus cam)basically i wanna know who's the absolute baddest for building this all motor...motor. we want to go after the all motor record and feel we have the car (suspension and weight wise) to do it with, and we can do heads/cam and the rest of the setup to get it done, but we don't have engine building facilities here at the shop (yet)...so what shop wants to design (think up) the setup and build it?

07BlueDevilZ06

iTrader: (8)

give us a call we are not cheap but will get ya the power you need we currently have the heads cam record of 505hp we can set ya up with a long block that can make the same in stock piston form or more in forged piston form

george

A3Z28

i'm talking about a 750+ horsepower Naturaly Aspirated motor...if you think you guys can get that done shoot me a pm, or email. thanks George.

10.5 Dave

iTrader: (5)

Wheel to Wheel,their not cheap but are capable of helping you achieve your goal.

A3Z28

i've heard of w2w being very bad ***, i'm going to give them a call sometime this week.

distortion_69

iTrader: (20)

Futral Motorsports has built some stout all motor cars, W2W has built some of the sweetest stuff around as well.. Those are going to be your best bets. Futral is pretty backed up right now, so if you are actually interested you might want to call them and ask them the lead time.

Peace,
Josh

MUSTANGEATER

iTrader: (10)

W2W and FMS would both be good choices, don't forget some of the real good non sponsors or small shops though

Slowhawk

iTrader: (12)

Building the motor isn't a problem for the shops listed,your problem will be that this time of the year everyone is probly booked up.Of course you already know 700hp NA is not cheap

DopeFedZ

iTrader: (34)

Call LME ---->

mikey

iTrader: (6)

Guys, I think he just wants a short block. Give me a shout. We had a 318CI Mopar (out of a 79 Dodge van ) on the engine dyno last week that did 558 hp with 8.5:1 CR. Very light weight rotating and some other tricks

I'd like to discuss your goals.

MUSTANGEATER

iTrader: (10)

Hey Mikey, do you do any tuning on the engine dyno? If so could you PM me a price.


Floyd.

A3Z28

i definatly know it wont be cheap, and i just want a rotating assembly with the block machined and everything ready to run. i do want the builder's opinion cam/head setup, but for now i'm planning on AFR heads...mikey i'll give you guys a call tomorrow. i tried to call LME today and their number was turned off.

mikey

iTrader: (6)

Yes but only for the engines we build and by customer request.

Bryan@LME

iTrader: (4)

We recieved many calls today. You possibly have the wrong number.
713-849-4505

Thank you,
Bryan

A3Z28

i had the wrong number, thanks Bryan, i guess i put it in my phone wrong. i'll give you guys a call tomorrow. and you too Mikey...thanks guys.

kickassT/A

iTrader: (3)

another vote for LME. bad *** motors, good people to deal with.

TTPMatt

iTrader: (18)

i dont think you can get 700 to the crank na 346 maybe 650 i think i can get ya 650 to the crank no problem let me know we build motors all the time.

george

Scoobie

iTrader: (8)

Ttp -------------->

A3Z28

not looking for 346 cubic inches...maybe 446, but stock cubes sucks