How to add a pin to the PCM connector?
#1
11 Second Club
Thread Starter
iTrader: (13)
Join Date: Jun 2002
Location: The Confederacy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
How to add a pin to the PCM connector?
I've completed a A6 to M6 conversion for a guy and everything went pretty smoothly. Except for connecting up the Reverse lockout solenoid. I have to connect it to the lt green wire from the red connector at position #44.. BUT, on an A4 wiring harness that place is blank, no pin or wire there. Is there a pin that can be slid down into the plug and a wire soldered to it?? Please let me know ASAP!
Thanks
Thanks
#2
TECH Senior Member
iTrader: (5)
Join Date: Apr 2002
Location: Truck Heaven
Posts: 7,277
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gomer
I've completed a A6 to M6 conversion for a guy and everything went pretty smoothly. Except for connecting up the Reverse lockout solenoid. I have to connect it to the lt green wire from the red connector at position #44.. BUT, on an A4 wiring harness that place is blank, no pin or wire there. Is there a pin that can be slid down into the plug and a wire soldered to it?? Please let me know ASAP!
Thanks
Thanks