Sponsor Sales & Specials - Innovate LM-1 and LC-1 Wideband O2 Sale

We're having a sale on the Innovate wideband O2 setups. These prices should be some of the lowest ever seen for these kits. The sale will end on Wednesday, May 11th (one week). This is not a group purchase. Your kits will ship as soon as they are ordered as long as they are instock.

LM-1 Air/Fuel Ratio Meter (KIT) $324 + s/h (plenty instock)
http://www.eadperformance.com/catalog/product_info.php?products_id=461
Includes: LM1, Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start Guide.


LM-1 Kit with RPM Converter (LMA-2) $400 + s/h (plenty instock)
http://www.eadperformance.com/catalog/product_info.php?products_id=463
Includes: LM1, RPM Converter (Aux Input #2), Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start Guide


LM-1 Kit with AuxBox (LMA-3) $560 + s/h (not instock, about 1 week wait)
http://www.eadperformance.com/catalog/product_info.php?products_id=462
Includes: LM1, AuxBox (LMA-3) Input Accessory, Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start Guide


LC-1 wideband controller with 02 Sensor $180 (not instock, about 1 week wait)
http://www.eadperformance.com/catalog/product_info.php?products_id=460

Thanks for checking
Tim @ EAD Performance

to the top

Hey Tim I PM you

Hey Tim I PM you

Responded

Tim will this work with HP tuners?

Thanks,
Glenn

Tim will this work with HP tuners?

Thanks,
Glenn

As far as I know there are no problems with it working with HP Tuners. :)

So with the HP tuners Enhanced I/O option(capable of receiving a 0-5v signal), all you need is the LC-1?

So with the HP tuners Enhanced I/O option(capable of receiving a 0-5v signal), all you need is the LC-1?


That should do the trick. Innovate uses a analog output signal of 0v-5v.
More info here: http://www.innovatemotorsports.com/resources/SampleAnalogOutTable.pdf

They have quite a few options for setting up the output signal: http://www.innovatemotorsports.com/resources/autometer-integration.php

All orders have been shipped as of today. If you have not received a tracking # yet, please let me know and I'll send it right away.

What do I get (and what would I miss) with LC-1, HPT and no EIO box? does it even make sense?

i'm not sure if i wanna go lc-1+eio or lm-1 standalone/portable setup. could you gimme the two scenarios of what i can and cannot do, and how much is it cost?

How long is the LC-1 on sale???