Sts turbo tune (5psi) for drive home from shop doing install
06-02-2005, 04:18 PM
#1
Launching!
Thread Starter
iTrader: (4)
Join Date: Jun 2003
Location: valley village, los angeles
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Sts turbo tune (5psi) for drive home from shop doing install I am getting my sts 60-1 install done at one shop and tuned by another. Can I drive the car home with no tuning? I have the following parts for install. greddy boost controller, in tank walbro pump, 42lb injectors, tial bov, t6's.
Anyone have a 5psi tune that might work?. any help is appreciated
thanks
Mike
Anyone have a 5psi tune that might work?. any help is appreciated
thanks
Mike
06-02-2005, 05:06 PM
#2
I can tell you this much, if it's not tuned do not under any circumstances go into boost until it's tuned. I've seen several posts in the forced induction section that go "i could resist the temptation and blew my motor on x psi after 3 pulls"
The stock stuff is pretty strong, it's just intollerant of mistakes and big explosions.
The stock stuff is pretty strong, it's just intollerant of mistakes and big explosions.
06-03-2005, 09:17 AM
#3
Originally Posted by socalstreetracer
I am getting my sts 60-1 install done at one shop and tuned by another. Can I drive the car home with no tuning? I have the following parts for install. greddy boost controller, in tank walbro pump, 42lb injectors, tial bov, t6's.
Anyone have a 5psi tune that might work?. any help is appreciated
thanks
Mike
Anyone have a 5psi tune that might work?. any help is appreciated
thanks
Mike
baby that sucker until you can get a tune...
