69 Model Z28 emblems
#1
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Jan 2005
Location: Rowletts,KY
Posts: 1,004
Likes: 0
Received 0 Likes
on
0 Posts
69 Model Z28 emblems
I am wanting to put the older 69 Emblems on my 02. The Fenders are no biggie but I am wondering which will fit in the space alowed on the rear sail panel. I am wanting to put it where the emblem is now. Any sugestions or demintions would be good. Thanks
#2
On The Tree
iTrader: (2)
Join Date: Nov 2004
Location: Wisconsin
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
There isnt much room to be able to put them in the same place. The fender ones are smaller than the front and rear ones. I used the smaller fender ones for the rear.
This is what I did with mine.
This is what I did with mine.
Trending Topics
#9
Originally Posted by Black98Z28
damn i really dig the billet grill with the Z/28 emblem thats what i wanna do...is it hard to throw that emblem on there without wondering if its gona fall off while ur driving down the freeway?
#11
TECH Fanatic
iTrader: (1)
Join Date: Jun 2005
Location: Knoxville, TN
Posts: 1,301
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hllywd
There isnt much room to be able to put them in the same place. The fender ones are smaller than the front and rear ones. I used the smaller fender ones for the rear.
This is what I did with mine.
This is what I did with mine.
#12
On The Tree
iTrader: (2)
Join Date: Nov 2004
Location: Wisconsin
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
To waltsfastz:
Ya the ones on the fenders and the rear are fender ones. Like stated before I ground off the pegs of those three and used 3M tape. The front one I just attached normally to the grille. I have an aftermarket grille from grille tech, the diamond style.
Ya the ones on the fenders and the rear are fender ones. Like stated before I ground off the pegs of those three and used 3M tape. The front one I just attached normally to the grille. I have an aftermarket grille from grille tech, the diamond style.