Kooks Y pipe....a couple of questions..
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Earth
Posts: 1,682
Likes: 0
Received 0 Likes
on
0 Posts
Kooks Y pipe....a couple of questions..
I already have Stainless Works headers on my car, but my buddy is now considering getting Kooks headers. Their website is a bit weird, so anyhow...I know that for the longest time they only had their Y pipe in aluminized steel, do they have a stainless version yet?
Also, the bigger concern is the floor banging issue. I had some issues with my Y pipe which I finally resolved with the Mufflex Y-pipe hanger thingy. Does anyone have problems with their Kooks Y pipe banging?
Thanks!
Manny
Also, the bigger concern is the floor banging issue. I had some issues with my Y pipe which I finally resolved with the Mufflex Y-pipe hanger thingy. Does anyone have problems with their Kooks Y pipe banging?
Thanks!
Manny
#2
TECH Regular
iTrader: (60)
Join Date: Nov 2004
Location: Jacksonville, FL
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
I've got Kooks 1 3/4 Stainless Headers to a 3" collector and the ORY.
I don't have any banging issues at all. The spot on the drivers side is actually flattened out for clearance. The only issue I had was a 3 minute fight trying to get the driver's side of the y-pipe on...that's about it.
I don't have any banging issues at all. The spot on the drivers side is actually flattened out for clearance. The only issue I had was a 3 minute fight trying to get the driver's side of the y-pipe on...that's about it.