xfactor_pitbulls

iTrader: (16)

Attached is the flow sheet from the latest set of 6.0 heads I have done. Not bad for a guy working out of the house Would like to say thanks to Trevor Johnson for all the advice. He has gotten me past a few sticking points that nobody could just "figure out". Not the biggest top end #'s, but they are right off the flow bench and stay consistant from .200-.700.

Brandon

Brandon Boomhauer

iTrader: (10)

look pretty good!

xfactor_pitbulls

iTrader: (16)

Thanks, I think so.

Brandon

ArcticZ28

iTrader: (14)

Yea, def pretty good for doin it yourself. Trying to put em on a project car to see how much they gain?

Brandon Boomhauer

iTrader: (10)

I'll put 'em on my car and see what she does.

ArcticZ28

iTrader: (14)

Hey, I called dibs!!!

"You can't triple stamp a double stamp."

xfactor_pitbulls

iTrader: (16)

These are not going on my car, I did them for someone else. The 241 heads on my car flow right at 300 at .600 and 205 at .300. I will get a new dyno number after I put on the fast intake. Right now we will just say around 435whp with a mail order tune. I have another set of 317 castings in my shop and I am going to get alittle more agressive with them and run a 2.05 valve. Shooting for about 320cfm.

Brandon

joelvette

iTrader: (11)

those are my heads he just did, unfortunatly they wont see any petrol for 8-12 months. pro-touring a 73 formula with a 6.0, 4l60, baer, hotchkiss, global west, $$$, etc

xfactor_pitbulls

iTrader: (16)

Be sure and let us know when you get it together Joel! Should be a cool project.

Brandon

GuitsBoy

iTrader: (4)

Without divulging any secrets, Can you link us to any helpful information you might have? Im planning on doing some DIY 241's over the winter and Ive read everything I could find on this site, and Ive collected a bunch of cross sectional photos of the heads. If you have some extra bookmarks you can pass on, it would be greatly appreciated!

Thanks,
-T

EDIT: Great numbers, by the way. And imitation IS the sincerest form of flattery

xfactor_pitbulls

iTrader: (16)

Honestly the biggest thing I have going would be destroy several heads and doing R&D. My first 2 full sets of heads were better than stock , but I wouldnt say they rival anyone that sells them regularly. I have done around 15 now and have also had alot of great pro advice. I'll tell you what, I am going to pm you my number and feel free to call me this weekend. I can give you some helpful tips.

Brandon