Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Tranny slip

Thread Tools
 
Search this Thread
 
Old 11-18-2005, 07:55 AM
  #1  
Teching In
Thread Starter
 
JeanSS's Avatar
 
Join Date: Nov 2005
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default Tranny slip

I had my auto tranny serviced in my 01 SS camaro at the local chevy dealer and ever since then at slow speed less than 10 mph while still in 1st gear it seems to slip to neutral when I let off the gas and it will grab suddenly when I give it gas and RPMs catch up to that speed, anyone know whats going on here?
Old 11-18-2005, 08:41 AM
  #2  
TECH Senior Member
iTrader: (24)
 
Reject's Avatar
 
Join Date: Apr 2005
Location: Texas
Posts: 9,197
Received 4 Likes on 3 Posts

Default

first, what was done to the car? knowing where they were at under the car probably will help others have an idea as to what it is.
Old 11-18-2005, 03:20 PM
  #3  
Teching In
Thread Starter
 
JeanSS's Avatar
 
Join Date: Nov 2005
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default Tranny slip at slow speed

The dealer did a complete flush and refill and new filter. The car has 43000 miles
Old 11-18-2005, 08:23 PM
  #4  
Launching!
 
TeamTripp's Avatar
 
Join Date: Jun 2004
Location: Mooresville, NC
Posts: 269
Likes: 0
Received 0 Likes on 0 Posts
Default

When it does this, does the engine seem to rev freely, or does it just feel like its in a higher gear?

Is it possible they have have messed with the shift linkage at all?
Old 11-18-2005, 08:27 PM
  #5  
TECH Apprentice
iTrader: (2)
 
cam75w/ls1's Avatar
 
Join Date: Jul 2005
Location: Texas
Posts: 305
Likes: 0
Received 0 Likes on 0 Posts
Default

Did you check the fluid level? Is this car driven hard?
Old 11-18-2005, 09:30 PM
  #6  
Restricted User
 
Automatics's Avatar
 
Join Date: Apr 2004
Posts: 377
Likes: 0
Received 0 Likes on 0 Posts
Default

The overrun assembly not holding (overrun clutches, overrun hub, overrun sprag) can cause this to happen.
Old 11-19-2005, 08:44 AM
  #7  
Teching In
Thread Starter
 
JeanSS's Avatar
 
Join Date: Nov 2005
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

the engine seems to rev freely. thamks for the response.
the car is not driven hard my wife drives it lik it has a 4 cylinder.




All times are GMT -5. The time now is 07:26 AM.