JDJP

iTrader: (2)

1998 TA
Thought it was the transmission mount, got it replaced, the noise didn't stop.
After about a month I finally hung my head down and looked under the car while I tourqued the engine, and saw the exhaust hitting the bottom of the car. It makes a loud thumping every time I get on the gas a little. Considered it being an engine mount, but the pipe is only about 3/4" away from the floorboard, the previous owner installed it.
Anything I can maybe wrap it with in that spot, so it stop banging?

any ideas welcome
Thanks
JD

Nick D

Prothane motor mount from Thunder Racing. Sucks to install, but it WILL stop banging. No drawbacks, except the install.

SSilverSSurfer

iTrader: (8)

sounds like you need a thunder racing bumpstop

Juiced2000SS

iTrader: (1)

What he said, get one of these.

Full-Force

iTrader: (11)

what you need is the poly motor mount, thats the problem

you wont believe how much it will tighten up the entire ride of your car by keeping that motor from shaking around so much

Nick D

The bumpstop only works if you have a 3 inch y pipe. That just deadens the sound. The poly motor mount will eliminate it from occurring. Just my 2 cents.

1BADTALS1

iTrader: (4)

i got the thunder racing bumpstop and it does nothing its just added weight and a wast of money IMHO