MattZ28

iTrader: (4)

http://www.mattz28.com/Z28/12.26.wmv

http://www.mattz28.com/Z28/12.27.wmv


Trap was a consistent 109.xx, and 1.65 60' on both runs. Let me know what you think.

28" MT ET drag radials, 3200 Vigilante, Moser 12-bolt w/3.73s. stock heads, intake, throttle body, etc.

BizZzatch350

iTrader: (33)

Looks good, now spray it

MattZ28

iTrader: (4)

Be patient.

Should have spray times within the next month.

LS1 Eddie

iTrader: (2)

Nice videos. That first one was awsome. What was the car next to you packin?

BizZzatch350

iTrader: (33)

Hard to be, Javier fix his trans yet?

MattZ28

iTrader: (4)

The trans is the least of his worries. His motor is trashed at the moment....needs new lifters and a cam at the least. We might just replace them and do a few oil changes to flush all the metal shavings out as a temporary fix. (lifters spun in the bores and trashed the cam).

In the 12.26 vid, that's against my friend's '95 Z28 with GTP heads and a CC306.

pontiacfireTAWS6

great video footage what RR and what is the lift on the cam?

Speed Density

iTrader: (38)

Do you have any suspension mods done?

_SHIFT

dude that bid vs the heads/306 was badass

way to go with the 224/230 it brings me faith in the cam

MattZ28

iTrader: (4)

Comp XE 224/230 .536/.544 with 1.6 RRs.

Only suspension mods are LCA's, removed front swaybar, poly torque arm mount and poly rear swaybar bushings/endlink.s

Thanks guys

Speed Density

iTrader: (38)

Nice! Well im doing the Xe 503 swap in april so i hope to see some good numbers.

chevy94c

awesome videos and times too Matt

MattZ28

iTrader: (4)

thanks.