Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Nitrous stalling out!

Thread Tools
 
Search this Thread
 
Old 04-02-2006, 09:18 PM
  #1  
12 Second Club
Thread Starter
 
bodydropped's Avatar
 
Join Date: Nov 2004
Posts: 259
Likes: 0
Received 0 Likes on 0 Posts
Default Nitrous stalling out!

Every time I spray my car it stalls for about half a second the comes on hard.Is it sucking my fuel rail dry?I'm spraying a 100 shot on the NOS plate.Also it hits alot harder on 600 psi vs 1000 psi and the purge cloud is ALOT bigger at 600.Why is this?
Old 04-03-2006, 08:53 AM
  #2  
Closed ex-Sponsor Account
iTrader: (1)
 
NXRICKY's Avatar
 
Join Date: Jul 2004
Location: Wichita Falls, TX
Posts: 2,797
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bodydropped
Every time I spray my car it stalls for about half a second the comes on hard.Is it sucking my fuel rail dry?I'm spraying a 100 shot on the NOS plate.Also it hits alot harder on 600 psi vs 1000 psi and the purge cloud is ALOT bigger at 600.Why is this?
The stalling sounds like a lean spike. Do you have a gauge connected to fuel side of things?

Ricky
Old 04-03-2006, 11:31 AM
  #3  
10 Second Club
iTrader: (1)
 
=ZoomZ='s Avatar
 
Join Date: Oct 2005
Location: Winter Springs
Posts: 354
Likes: 0
Received 0 Likes on 0 Posts
Default

check your plugs ,, hehe

You guessed it ,, your most likely sucking the fuel rails dry .
Old 04-03-2006, 08:06 PM
  #4  
12 Second Club
Thread Starter
 
bodydropped's Avatar
 
Join Date: Nov 2004
Posts: 259
Likes: 0
Received 0 Likes on 0 Posts
Default

Plug looked normal.
Old 04-03-2006, 08:06 PM
  #5  
12 Second Club
Thread Starter
 
bodydropped's Avatar
 
Join Date: Nov 2004
Posts: 259
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm doing a dyno friday so we will see!
Old 04-04-2006, 12:08 AM
  #6  
TECH Senior Member
iTrader: (2)
 
Robert56's Avatar
 
Join Date: Aug 2003
Location: Tacoma, WA
Posts: 9,557
Likes: 0
Received 1 Like on 1 Post

Default

Yea it does sound like a lean problem. At 600psi that is the same as putting a smaller n2o jet in. Dyno is a good place to check the problem out.
Robert




All times are GMT -5. The time now is 11:00 PM.