marcus769

I'm about to buy such a car, and was just curious what I should expect to run in the 1/4 mile with 305 Drag radials, 4.10 gears, LT headers, 3" X pipe, and borla straights? (moderate driver w/ 6 speed). I'm waiting for some paper work, and the car should be shipped next week! I'm fired up! Car was built/dyno tuned by Futral Motorsports.

Thanks guys! Im getting excited!

steveb

I'd say high 10's low 11's if you can drive her. Good luck with you new ride you will love it.

Steve

David Gordon

iTrader: (1)

My 01 w/ 3.90 gears and 489 rwhp and 470 rwtq ran a best of 11.5s @ 121 mph. This was done with Mickey Thompson drag radials and 1.6 60'.

V-seriesTech

iTrader: (5)

tens...

usd2sing

iTrader: (15)

11.4-12.0 (traction pending)

you'll only get 1 run in if you go quicker that 11.49...unless u already have the rollbar, harness and firejacket.
good luck

cantdrv65

iTrader: (3)

Thats an awful low MPH for 489rwhp.....

2MuchRiceMakesMeSick

With a moderate driver high 10s low 11s

David Gordon

iTrader: (1)

A stock Z06 at my track only runs 107 or 108 w/ good driver at our track. Our air is ussually around 6,000' adjusted. I have trapped 121 in 5800' so at 1000' I am sure it would be better.

RACINREDLT1

I AM FROM MIDLAND/ODESSA AREA AND HAVE SEEN YOUR CAR AT THE TRACK AND CAN SAY THAT YOU NEED TO LEARN HOW TO DRIVE.

RACINREDLT1

I HAVE A 04 CORVETTE 6-SPEED STOCK AND RAN IT AT PENWELL AND RAN A 105 TRAP SPINNING OFF THE LINE AND 1-2 AND 2-3 GEAR CHANGE ON STEET TIRES SO WHAT WRONG WITH THIS PICTURE?

RACINREDLT1

Btw Not A Z06

David Gordon

iTrader: (1)

I need to learn to drive, man that is plain rude. I have been racing for years. My 01 Bone stock ran 106 while a freind of mines 02 Zo6 ran 108 and we both can drive.
I am sorry that I only ran 121 max but I have seen many high hp cars run there and they dont show the numbers that their cars are capable of at Penwell.

RACINREDLT1

I Am Just Saying Your Car Should Run Low 11's High 10's With Those Kind Of #'s My Stock C5 Ran 13.59@105 Friday At Penwell With Traction Problems. In All Actuality You Should Be In The Tens With 489rwhp. My Opinion.don't Mean To Be Rude Just Stating What I Have Seen.

David Gordon

iTrader: (1)

Like I stated I ran 13.5 @ 106 spinning and now I run 11.6 @ 121 still have traction problems (drag radials). 121-106 = 16 mph diffference =160 hp.
Car had 324 rwhp stock now has 489 489-324=165 hp.

Who are you?

We are trashing this mans thread.

Sigforty

I have a Z06 that was making 423 rwhp, 608 rwtq and was running 11.7 all night long on et streets. I need to get some new times as I am now making 451 rwhp

steveb

That TQ number doesn;t sound right, NOS?

cantdrv65

iTrader: (3)

WOW! I didnt realize the DA was that high in Midland. My thinking defaults to Houston sea level air!

keliente

iTrader: (22)

So did you figure out why it was billowing blue smoke out the rear?

marcus769

Not for sure.... I will check a few things and go from there. Planning on a leak down test at some point. If it goes, I'll end up putting an SDPC 402 shortblock. Run a conservative 500rwhp. That should be plenty. Everything on the engine now, should piece to the shortblock. Shouldnt need too much more stuff i wouldnt think? I am new to modding engines, but I dont see what else i would need to make that shortblock drop in and run? I'm sure there will be a few supporting components i would need yet.

I'll keep you posted. Car is scheduled to arrive here May 8th-10th.

Sigforty

Should have been 408 guess I hit the wrong key.