Info on Effects of Water/Alky Injection
#1
Info on Effects of Water/Alky Injection
I want to know how much of a difference it makes on FI. I am building a 402cid with 9.25:1CR, large cam, and a F1R. I was told by a shop that with the largest pulley I could see 20psi of boost at 6000rpm. I am attempting to run on pump gas with this much boost. I want to know how much water/alky will lower intake temps or EGTs. I am trying to ask only guys that have done something like this.
#3
LS1TECH Sponsor
iTrader: (7)
Join Date: Jan 2002
Location: Houston, TX
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
.....
search cablebandits threads he had some good research on this. Note his results were also based on the nozzle sizing and pump flow and pressure.
Originally Posted by Gold Phoenix
I want to know how much of a difference it makes on FI. I am building a 402cid with 9.25:1CR, large cam, and a F1R. I was told by a shop that with the largest pulley I could see 20psi of boost at 6000rpm. I am attempting to run on pump gas with this much boost. I want to know how much water/alky will lower intake temps or EGTs. I am trying to ask only guys that have done something like this.