LS1 = Bolt on Badass????
#1
LS1 = Bolt on Badass????
Okay McNuggets... I need some help here. Ive got a 2001 WS6 and Ive got some LTs True Duals, SLP lid + KN of course. I was hoping to get 400rwhp or close to it with bolt ons but every other bolt on I look at is like 2hp or 5hp and everyone tells me not to bother, can you guys toss some help my way, has anyone gotten the 400hp number out of bolt ons with an A4?
#6
297rwhp stock wasnt too bad. Most Ive heard was in the 310-320rwhp area. Also that was on a portable dyno so its not entirely acurate. My friend got 305rwhp out of his full bolt on 2000 Z28, so I dont think Im in a bad starting place.
Trending Topics
#8
That's what she said...
iTrader: (8)
You can make over 400hp with boltons, but not 400rwhp. A ***** out full bolton setup with everything possible AND a tune won't get you there. The highest of high RWHP cars are only making around 35Xrwhp, with these most always being 6-speed cars. Anyone making over 330rwhp from boltons should consider themselves as doing good.
#9
Im goin gears, but I think Im going to avoid stall for a while cause I have to drive it in the snow this year. Next year Im goin stall. Thinkin 75 dry shot to get my 400rwhp magic number, although TSP has a deal on LS6 heads...
#13
TECH Fanatic
iTrader: (10)
Originally Posted by Avalanche
I have to drive it in the snow this year..
One of my best decisions before modding: 1993 Honda Civic. bought it w/ some minor body damange w/ 97k miles in October of 2004 for $1150. Since then, I've put 40k miles on it already, replaced 2 tires, front rotors + pads, and a slave cyl (easy fix, unlike our ls1's). Do that 1st, and keep your ls1 for the sunny days
#15
Who cars about your horses man. Times should be your concern, Get a stall and some slicks or et streets. Only 03 or 04 cobra guys car about dyno numbers LOL! I beat up on one last night so I had to say it.
#16
TECH Resident
iTrader: (22)
Join Date: Feb 2005
Location: Phoenix, AZ
Posts: 907
Likes: 0
Received 0 Likes
on
0 Posts
Yeah bolt-ons can get you in the 360+ running through a M6, A4 always dyno less, but you can add a stall to help with ET's.
Now if you purchase the absolute best parts ie QTP or Kooks with a Fast 90/90 setup, I have seen an M6 car dyno around 370 with a basic tune. It's not cheap but you will see a difference over Pacesetters or LS6 respectivly.
Look into bolt-ons then possibly a cam to reach 400.
Now if you purchase the absolute best parts ie QTP or Kooks with a Fast 90/90 setup, I have seen an M6 car dyno around 370 with a basic tune. It's not cheap but you will see a difference over Pacesetters or LS6 respectivly.
Look into bolt-ons then possibly a cam to reach 400.
#17
TECH Resident
iTrader: (1)
Join Date: May 2004
Location: Tree-Hugging, Bug eating CALI'
Posts: 848
Likes: 0
Received 0 Likes
on
0 Posts
I got 360/ 371 RWHP/RWTQ through my A4, with the stall locked. Lid, QTPs-HVMC, cats', open Borla, and tune, basically. I think there was a little left, because the IAT was nearly 110*. I got 354/360 with the standard QTPs and 78* IAT, with the only changes being HVMCs. I don' t think 400 RWHP is possible with a large cam.
Good luck though!!!
Good luck though!!!