DCR help
#1
11 Second Club
Thread Starter
iTrader: (14)
Join Date: Aug 2003
Location: Kentucky
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
DCR help
Ok, i know there is a sticky for this, but i guess im just not smart enough to figure it all out..
Can someone PLEASE help me SPEC a cam that puts me in the optimal DCR range.
cylindar head = 67cc
piston = 2cc VR
head geasget thicknes = .004
cylinder bore = 4.031
deck clearance = -.002
stroke = 4"
rod length 6.125
Just really need some cam specs to play with.. everything that i thought would put me in my range is only like a 6.75 DCR..
I know someone here is smarter than me at this, i need to tell the builder tomorrow what cam to slap in it, so any help would be awsome!!
chris
Can someone PLEASE help me SPEC a cam that puts me in the optimal DCR range.
cylindar head = 67cc
piston = 2cc VR
head geasget thicknes = .004
cylinder bore = 4.031
deck clearance = -.002
stroke = 4"
rod length 6.125
Just really need some cam specs to play with.. everything that i thought would put me in my range is only like a 6.75 DCR..
I know someone here is smarter than me at this, i need to tell the builder tomorrow what cam to slap in it, so any help would be awsome!!
chris
Last edited by chrismcdaniel; 07-25-2006 at 01:03 PM.