WhGaskets to run with Mahle valve relief pistons
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Jan 2005
Location: Greensboro NC
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
WhGaskets to run with Mahle valve relief pistons
Ive got PRC LS6 heads, a T2 cam on a 112, and 4cc Mahle forged valve relief pistons, and a cometic .040 gasket. Should I get the .030 gasket or smaller gasket to get more compression for my setup or would i have to worry about PTV clearance or should I just run what i have??? Im just tryin to make as much power as possible with my setup.
Thanks
Seth
Thanks
Seth
#2
TECH Senior Member
Originally Posted by seth webster
Ive got PRC LS6 heads, a T2 cam on a 112, and 4cc Mahle forged valve relief pistons, and a cometic .040 gasket. Should I get the .030 gasket or smaller gasket to get more compression for my setup or would i have to worry about PTV clearance or should I just run what i have??? Im just tryin to make as much power as possible with my setup.
Thanks
Seth
Thanks
Seth
What cam advance?
What bore size?
What rod size?
Head chamber CC?