Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

waterpump?

Thread Tools
 
Search this Thread
 
Old 09-07-2006, 10:02 PM
  #1  
On The Tree
Thread Starter
 
dudemandanman's Avatar
 
Join Date: Oct 2004
Posts: 124
Likes: 0
Received 0 Likes on 0 Posts
Default waterpump?

heres my problem, i was driving when i started to hear a wierd noise, then i started to smell something burning. so i pull to the nearest parking lot and turn off the car. i pop the hood totake a look and theres a little bit of smoke rising, but it was dark out and couldn't really take a good look at what was going on. so i decide to take the car home, and just as i turn the car on and back out the belt goes. i pick up the belt and go home. the belt is split and semi melted, so a pulley seized. i've been doing some searched but only been seeing thrown belts due to tensioners. now i'm pretty positive the waterpump seized. i went out after the car cooled and tried to turn the pulley and it wouldn't budge, but i'm not sure if thats how it always is.

so someone please confirm this for me so i can fix the problem asap.

thanks in advance.
Old 09-07-2006, 10:17 PM
  #2  
Banned
iTrader: (15)
 
michael402z06's Avatar
 
Join Date: Mar 2005
Location: Oak Harbor, WA
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default

since the belt is off it should turn by hand.




All times are GMT -5. The time now is 08:00 PM.