Drag Racing Tech
Sponsored by:
Sponsored by:

what are the avg. stock 1/4 times for a stock f-body

Thread Tools
 
Search this Thread
 
Old 09-24-2006, 12:25 PM
  #1  
12 Second Club
Thread Starter
 
austin21's Avatar
 
Join Date: Oct 2005
Location: New Castle,IN- West Lafayette,IN
Posts: 536
Likes: 0
Received 0 Likes on 0 Posts
Default what are the avg. stock 1/4 times for a stock f-body

hey guys i was just wondering if i was right about this because someone on anothere forum keeps telling me im wrong so what am i wondering is what are the stock 1/4 mile times for an f-body .... i was thinking it was like 13.6 or 13.4
austin21 is offline  
Old 09-24-2006, 12:35 PM
  #2  
12 Second Club
 
TransAm8723's Avatar
 
Join Date: Nov 2005
Location: Cincinnati, OH
Posts: 132
Likes: 0
Received 0 Likes on 0 Posts

Default

From what I've read on here and other sites, I would say that should be close to the stock 1/4 times for most stock f-bods. A4's will usually be a little higher than M6's (given the M6 driver can in fact drive). I think most everyone else will probably agree. So yea, I'd say your guess is spot on. Just my .02

Just out of curiousity, what was your "friend" you were arguing with saying stock times should be?

Jeremy
TransAm8723 is offline  
Old 09-24-2006, 12:37 PM
  #3  
TECH Addict
iTrader: (3)
 
EchoMirage's Avatar
 
Join Date: Oct 2005
Location: SE VA
Posts: 2,255
Likes: 0
Received 0 Likes on 0 Posts

Default

It can range anywhere from very low 13s to high 13s, depending on driver, stick/auto, and conditions. HPP just ran an article on how much real world power you get from SLP's performance pacs. They tested a complete stock 99 TA, non-WS6, auto, 3.23, with 80k miles. I'm guessing it had drag radials, but the baseline run in 48 deg. March air was 13.33 @ 103.36. WIth just adding the CAI, it went 13.11 @ 105.21. I'd trust HPP more then other mags, that could be biased when pitting one car against another, but you never know.
EchoMirage is offline  
Old 09-24-2006, 12:49 PM
  #4  
12 Second Club
Thread Starter
 
austin21's Avatar
 
Join Date: Oct 2005
Location: New Castle,IN- West Lafayette,IN
Posts: 536
Likes: 0
Received 0 Likes on 0 Posts
Default

he didnt really say what he thought they should be he just said i needed to do some research so i guess he thought they where lower ...like high 12's or something ..but thanks guys
austin21 is offline  
Old 09-24-2006, 01:00 PM
  #5  
TECH Fanatic
iTrader: (4)
 
NightWindDriftr's Avatar
 
Join Date: May 2006
Location: Key West, FL / Dallas, TX
Posts: 1,224
Likes: 0
Received 0 Likes on 0 Posts

Default

High 12s definitely aren't average for a stock f-body. I think it's been seen a few times by a few good M6 drivers and autos with stall and gears.
NightWindDriftr is offline  
Old 09-24-2006, 01:06 PM
  #6  
TECH Enthusiast
iTrader: (4)
 
Lucas'02SS's Avatar
 
Join Date: Jan 2006
Location: Oklahoma City, OK
Posts: 699
Likes: 0
Received 0 Likes on 0 Posts
Default

I thought average was around a 13.3. But I do know people running high 13's, and I also know guys who have ran 12.8s in a bone stock f-body.
Lucas'02SS is offline  
Old 09-24-2006, 01:09 PM
  #7  
'Bird Director
iTrader: (80)
 
y2k_ta's Avatar
 
Join Date: Dec 2001
Location: Central Indiana Honors: 4th grade spelling bee contestant
Posts: 12,824
Received 27 Likes on 18 Posts

Default

Do a search......this topic has been beaten to death.
y2k_ta is offline  




All times are GMT -5. The time now is 07:24 PM.