98 Raptor TA

iTrader: (9)

It's running baby!!!!!!!!!!!!!!!!!! I just got through putting a MS3 in my TA and it sounds soooo good, cant wait till i get the true duals done next week Click below for video with no muffler (open y-pipe)

V6 Bird

iTrader: (15)

I did one a few weeks back for a customer and set the idle screw to idle right at 800rpm on stock tuning. It sounded goood.

Bout time you got it in the car though! sheesh!

98 Raptor TA

iTrader: (9)

Yeah i know Too many little stupid setbacks

monicaz28

iTrader: (5)

Can't wait to see it run. When are you gonna take it out to the track?

98 Raptor TA

iTrader: (9)

Very soon, i'm taking it to RPM for the retune on Friday. Cant wait to get my idle at like 850-900. This 1000rpm idle is killing my lope lol (speedtek tuned it at about a 1000 idle cause they suck ***** and are lazy, and decided to just raise the idle instead of making it run right at a 850 idle lol)

V6 Bird

iTrader: (15)

If the tune is dead on, that car will idle at whatever is commanded. Unfortunately RPM doesnt do well with SD tunes to be able to command the idle speed anyone could want. Ask Monica..she can provide more insight with her experience and a close friend of theirs, Jake.

98 Raptor TA

iTrader: (9)

I'm gonna go with a MAF tune i'm not going SD. I've heard pretty much nothing but good things about RPM, but nobody's perfect.

V6 Bird

iTrader: (15)

Theres alot of sugar coating on their Shop by people who dont know any better.

Hope it goes well and you still get decent fuel mileage from it. Ill keep my fingers crossed for ya bro!

Reject

iTrader: (24)

man lets see that video!

monicaz28

iTrader: (5)

Lol, yep, Mike's right. I'm not even going to go there about RPM, but the LAST thing I will ever do is take a car to be tuned speed density. After trying some stuff and failing, they THEN told Shaun that they were just starting this, and had a lot to figure out. Hence why we bought the program ourselves. We may not be perfect, but Shaun ran a 7.0 last week at Kennedale, so I'd say we're definitely gettin there. There are other issues I have with them, not from my own car, but from about 3 close friends, and one not so close friend. Damn it, I just went there didn't I?

NHRAMAN

iTrader: (1)

..get a vid soon.love to hear it...

monicaz28

iTrader: (5)

LOL, their SD tune is good for atleast keeping the mosquitoes away.

98 Raptor TA

iTrader: (9)

Yeah i'll try to take a video soon, but the video you'll want to see is gonna be after the tune to get that idle down and help the lope. It still lopes pretty good even at 1000rpm tho

NaSSty Nate

iTrader: (4)

You need some ported heads now...I got some that made 440 with the ms3 combo.

98 Raptor TA

iTrader: (9)

I wanna stay cam only, i'm guessing i'll make over 400 rwhp with my current setup and that enough for me right now.

eric01ss

iTrader: (13)

u going to go to the sonic meet tonite with the car?

98 Raptor TA

iTrader: (9)

I dont think so, i need to get it tuned before i drive it too much, it's bogging nasty i think i need my timing advanced cause my old cam had 4 degrees of advance ground in and the MS3 has no advance ground in.

Reject

iTrader: (24)

no no get a before and after video! got to make the video clip cinimatic with before's and afters! and monica too(even though the side walk is very pretty, lol, i wanna see the car getting romped on!)!!!

98 Raptor TA

iTrader: (9)

I already took a before video, before i put the MS3 in, i want the after video to be with the MS3 tuned and idling right otherwise whats the use in comparing them

kruthes1

iTrader: (2)

I just got mine put in too. Mine was SD tuned, what seems to be the problems that are associated with it?