NPB yesterday.
12-10-2006, 08:38 AM
#1
NPB yesterday. Went to the track yesterday and got a NPB.
FIRST RUN 1.50 60 and 10.47 @128mph, NPB.
2nd run 1.46 10.54@126 mph (spun at the 330 for some reason)
3rd run did not heat the bottle 1.54 , 10.68 @125mph
4th KABOOOOOOOMMMMMM!! Tire gone!!! 1.44 60ft though, lol!
And then later busting a relocation bracket and shredding a slick.
FIRST RUN 1.50 60 and 10.47 @128mph, NPB.
2nd run 1.46 10.54@126 mph (spun at the 330 for some reason)
3rd run did not heat the bottle 1.54 , 10.68 @125mph
4th KABOOOOOOOMMMMMM!! Tire gone!!! 1.44 60ft though, lol!
And then later busting a relocation bracket and shredding a slick.
Last edited by 97blkz; 12-10-2006 at 08:47 AM.
12-10-2006, 09:47 AM
#4
Originally Posted by Villain281H
Congrats man, bummer about the tire, any damage from it?
Derek
Derek
Little smack marks on the rear fender but SHOULD buff out. The wheel well had scrapes in it but not like we did not cut to fit the tire lol!
12-10-2006, 09:45 PM
#7
http://www.need2speed.com/vb_forums/...ad.php?t=24480
BlackTA(Pauly)vsWhiteTurboTA
BlackCamarovsWhiteTurboTA
These are the labels to two runs i made, the link above will connect you.
BlackTA(Pauly)vsWhiteTurboTA
BlackCamarovsWhiteTurboTA
These are the labels to two runs i made, the link above will connect you.
Trending Topics
12-13-2006, 11:25 AM
#13
Non Hydraulic cam, 150 shot. It ran a 10.83 on a 75 shot.
Cam specs 238/245 112 lsa 6xx lift. Dam I am forgetting my own specs, better look for the build sheet?
http://video.google.com/videoplay?do...86219979786300
Cam specs 238/245 112 lsa 6xx lift. Dam I am forgetting my own specs, better look for the build sheet?
http://video.google.com/videoplay?do...86219979786300
Last edited by 97blkz; 12-13-2006 at 01:17 PM.
12-13-2006, 08:33 PM
#17
Congrats are you going to bump it to a 175? Eventually 250
Nice runs, If you don't mind could you give us a detailed rundown of the car? Well its a 396, lt4 heads, unported intake(yeah I know), cam as mentioned above, 3200 vig stall, 3:73's, all bolts on just about. Slicks & skinnes. FJO n20 controller, it's set at 75 shot out of the hole and then to 150 (10 bolts scare me).
12 bolt goes in soon.
Nice runs, If you don't mind could you give us a detailed rundown of the car? Well its a 396, lt4 heads, unported intake(yeah I know), cam as mentioned above, 3200 vig stall, 3:73's, all bolts on just about. Slicks & skinnes. FJO n20 controller, it's set at 75 shot out of the hole and then to 150 (10 bolts scare me).
12 bolt goes in soon.