Anyone running MS4 w/ .040" Cometics?
#1
Staging Lane
Thread Starter
iTrader: (6)
Join Date: Nov 2006
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Anyone running MS4 w/ .040" Cometics?
I went ahead and ordered an MS4 cam from TSP.
BTW, Jon and Trevor are two great guys to talk to.
I am running my stock '01 LS1 shortblock and installing a set of Patriot LS6 CNC heads (not milled more than .004") and stock valves.
I know I have to do a PTV clearance check since I plan on installing .040" Cometics, just want to feel better about this attempt. If someone has done it, I'd feel better
Was wondering if anyone out there is running an MS4 with .040" cometics and if you had to flycut the pistons?
TIA
BTW, Jon and Trevor are two great guys to talk to.
I am running my stock '01 LS1 shortblock and installing a set of Patriot LS6 CNC heads (not milled more than .004") and stock valves.
I know I have to do a PTV clearance check since I plan on installing .040" Cometics, just want to feel better about this attempt. If someone has done it, I'd feel better
Was wondering if anyone out there is running an MS4 with .040" cometics and if you had to flycut the pistons?
TIA
#4
TECH Fanatic
iTrader: (2)
Join Date: Feb 2005
Location: Lee County, VA
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
i have a sim question...i have stage 2 patriot heads and wanting to know if the MS4 will fit without flycutting?
BTW, head specs are:
2.02"/1.57"/59cc
Edit: i am running the 231/237 .585/.595 112 LSA cam with these heads as of now with no probs and no flycutting
BTW, head specs are:
2.02"/1.57"/59cc
Edit: i am running the 231/237 .585/.595 112 LSA cam with these heads as of now with no probs and no flycutting
#5
TECH Senior Member
iTrader: (23)
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SVThis
i have a sim question...i have stage 2 patriot heads and wanting to know if the MS4 will fit without flycutting?
BTW, head specs are:
2.02"/1.57"/59cc
Edit: i am running the 231/237 .585/.595 112 LSA cam with these heads as of now with no probs and no flycutting
BTW, head specs are:
2.02"/1.57"/59cc
Edit: i am running the 231/237 .585/.595 112 LSA cam with these heads as of now with no probs and no flycutting