PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Some quick diablosport questions

Thread Tools
 
Search this Thread
 
Old 02-16-2007, 06:03 PM
  #1  
On The Tree
Thread Starter
iTrader: (2)
 
p8ntmunky's Avatar
 
Join Date: Apr 2006
Location: long island, levittown
Posts: 100
Likes: 0
Received 0 Likes on 0 Posts
Default Some quick diablosport questions

i just erased my codes finally but now the car is acting a lil funny on startup. I had misfire codes no rear o2 sensors and front o2s were burnt out, i replaced all that a long time ago and just got to erase them but now whenever i start my car it idles a little rough for a minute.It almost felt like it was backfiring again but after driving it it felt fine both while moving and idling and no ses light popped back on. Does it take a few cycles for the car to get back to normal?

Also i had some problems with my ac it still works fine but there were two codes and i accidently erased them will they pop back up with the ses light soon? because i want to find out what the code was so i can fix the problem
Old 02-17-2007, 09:00 PM
  #2  
12 Second Club
iTrader: (1)
 
thunderdan74's Avatar
 
Join Date: Jun 2005
Location: Sumter, SC
Posts: 445
Received 1 Like on 1 Post

Default

Give a few cycles. It should clear up.




All times are GMT -5. The time now is 08:13 AM.