1999ssls1

iTrader: (71)

I just got my crank and pistons in and motor wont turn. I am manualy turning it with 150ft/lb. The crank is fine and how its suppossed to be. The rings are hellfire and are file fit. I filled them to 22 and after just the first piston it was hard to turn. It is easy when the piston is on top or bottom, but when they get half way up it gets hard to turn. Someone please help
Thanks,
Michael

StreetStalkerZ

iTrader: (1)

Either your side clearance on the rods are to tight or you have the main caps backwards. What is the clearance or have you checked them?

1999ssls1

iTrader: (71)

We have checked both twice.