Fast Intake tq.
#4
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
Originally Posted by YellowMonster87
i believe the ls6 mani is said to ve 19ftlbs thats it....dont quote me though.. pretty sure but still double check
ls1howto may have it other then that do a search and see what cmes up
ls1howto may have it other then that do a search and see what cmes up
That just sounds too high. You know I have mushroomed Matco sockets trying to tq rockers to 22ftlbs, and this is composite we are talking here. I don't think that it is close to 20 at all.
#5
That's what she said...
iTrader: (8)
First pass 30 in-lbs (2.5 ft-lbs), 2nd pass 50 in-lbs (4.17 ft-lbs). This is straight off of the FAST install manual. I usually do hand tight with a 1/4" drive ratchet, make SEVERAL passes back over them after they're done. The first ones you did will come loose after the rest.
Here's the sequence...
http://i8.tinypic.com/3yckhe0.jpg
Here's the sequence...
http://i8.tinypic.com/3yckhe0.jpg
Trending Topics
#13
((((((Administrator))))))
Originally Posted by orangeapeel
I just got this terrible mental picture....please say it wasn't whitey tighties and a wife beater.