How much heat to kill a coil???
#1
Banned
Thread Starter
Join Date: Aug 2006
Location: Mukilteo, WA
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
How much heat to kill a coil???
We often get the question, "Won't the coils bake in there?"
We always reply ( like this ), "No, our test vehicle wore them for months in the summer without malfunction etc,etc..."
We want to be able to put peoples fears to rest, so we decided to try and kill some coils. We used an oven to bake the them at varying temperatures starting at 200 deg. F:
The coil was baked for 30 minutes, then the temp was raised another 50 deg:
We kept raising the temperature and forgetting about them for 30 min or so:
Had it set for 400, but by the time we got back from lunch it was almost pegged:
When the coils reached nice, round temp marks we pulled them from the oven (with a welding glove ; ) and hooked them up to our LQ9 escalade.
Look, I figured out how to work the camera:
...And couldn't get a misfire or CEL if we tried.
Any questions ?
We always reply ( like this ), "No, our test vehicle wore them for months in the summer without malfunction etc,etc..."
We want to be able to put peoples fears to rest, so we decided to try and kill some coils. We used an oven to bake the them at varying temperatures starting at 200 deg. F:
The coil was baked for 30 minutes, then the temp was raised another 50 deg:
We kept raising the temperature and forgetting about them for 30 min or so:
Had it set for 400, but by the time we got back from lunch it was almost pegged:
When the coils reached nice, round temp marks we pulled them from the oven (with a welding glove ; ) and hooked them up to our LQ9 escalade.
Look, I figured out how to work the camera:
...And couldn't get a misfire or CEL if we tried.
Any questions ?
Last edited by Ryan@ABear; 03-26-2007 at 07:19 PM.
#6
LS1TECH & Trucks Sponsor
iTrader: (34)
Nice work guys And very nice looking covers!
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice