What lifters with this setup?
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Miami, FL
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
What lifters with this setup?
I was gona order this http://www.lgmotorsports.com/catalog...oducts_id=1399
cam kit (G5X1 cam) from LG motorsports... along with a set of AFR 205cc heads...
What lifters should i order? also is there anything else im forgetting that i should order?
cam kit (G5X1 cam) from LG motorsports... along with a set of AFR 205cc heads...
What lifters should i order? also is there anything else im forgetting that i should order?
Last edited by exit; 04-10-2007 at 09:08 PM.
#2
TECH Addict
iTrader: (29)
Join Date: Apr 2005
Location: Margate, FL
Posts: 2,269
Likes: 0
Received 0 Likes
on
0 Posts
hey buddy i didnt know you were looking at the g5x1 cam...I think I may change to that too...
wow..
id go with the ls7 lifters..thats what I have, they are very nice and were an improvement over the other lifters GM made...
They held 7k RPMS, that's all I can say lol
Erik
wow..
id go with the ls7 lifters..thats what I have, they are very nice and were an improvement over the other lifters GM made...
They held 7k RPMS, that's all I can say lol
Erik
#4
TECH Fanatic
iTrader: (1)
Join Date: May 2004
Location: Northern WV just south of MD
Posts: 1,016
Likes: 0
Received 0 Likes
on
0 Posts
I think u can get about the same thing from TSP for less money. I got a pored LS6 oil pump when I did my cam change. I would stay with the stock lifter unless u get the caddy lifter. Also I would have the AFRs milled to 62 cc. and use .040 comtic gaskets. and AFR head studs. If u mill the heads dont get to big of cam unless u fly cut. 224 228 will fit. I hope.