Corvette Performance
C5 | Z06 | C6 | ZR1 | C7

windshield wipers

Thread Tools
 
Search this Thread
 
Old 04-18-2007, 06:04 AM
  #1  
Teching In
Thread Starter
 
darkriderzx10's Avatar
 
Join Date: Apr 2007
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default windshield wipers

I have an 98 c5 and i was riding in the car yesterday and i noticed that my windshield wipers would move 2-6 inches every few seconds. What could this be? I turned the wipers fully on and they worked fine. I also made sure I turned them fully off they work good. One thing I noticed was when I turned the car off I heard this grinding/motor knocking around the windshield wiper motor. Could it be that my motor could be going bad. Your help will greatly be appreciated..
Old 04-18-2007, 06:12 AM
  #2  
12 Second Club
iTrader: (17)
 
Frosty's Avatar
 
Join Date: Nov 2004
Location: Near Philly,PA
Posts: 1,639
Likes: 0
Received 0 Likes on 0 Posts

Default

There's water inside of the control module, very common problem. I have to replace motor assembly because of that. Do a search on the corvette forum and see what I mean. You can pull one of the utters out of the assembly and let the water drain out(if there's any in there).




All times are GMT -5. The time now is 04:00 PM.