JustinID

I could have sworn I saw a post with a link in it a few days ago that talked about how to do shock and spring installation on our cars... but now I can't find it for the life of me. Was I imagining this or is there a good document or web site that goes through all of the steps?

chupr0kabra

iTrader: (10)

Front:
http://www.ls1howto.com/index.php?article=6

Back:
http://www.ls1howto.com/index.php?article=8


-Mike

SLPSS99

iTrader: (7)

Thats what I used for a guide while doing the swap and had no probs at all!!

Dan

rd_ls1_z

Be careful with the passenger side, the nut is likely to be rusted to the shock shaft. You may need to drill it off, or cut it off.

JustinID

Thanks, that's exactly what I was looking for. Those instructions are great.

HavATampa

iTrader: (49)

The stickies up top are pretty great too, you should check them out sometime too.

https://ls1tech.com/forums/suspension-brakes/422236-lowering-guide-newbies.html