Anybody selling a roller?
07-12-2007, 12:05 PM
#2
TECH Resident
iTrader: (52)
Join Date: Jan 2004
Location: DFW
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
I have a blue 01 with 42k miles on it.Heres the list..Before you read relize that i owe $13,500 on it...I bought it as a roller for 11k and got a little extra on the loan to pay for the trans setup,t-arm,kyb shocks,ect.. I would sell the roller without the trans setup for $11,500..
out side apperance:
1.sunoco pin on hood (not installed yet but will be soon,i have the paint for it and to blend the front fenders and bumper cover).
2.SS spoiler
3.halo headlights, and clear corners
4.Draglight wheels.15x10's in the rear with 28 10.5 w tires
5.tinted windows
Chassis/suspension
1.wolfe 10pt cromoly cage with thru the floor subframe conectors.has window net aswell.(installed by wolfe himself).
2.BMR k member and Lower a-arms
3.KYB adj. shocks all the way around with a eibac prokit.
4.Wolfe lca's and phr.
5. edelbrock t- arm
6.Strange 12 bolt with 373's(has a aluiminam cover and relocation brackets welded on)
7. LG rear swaybar
Other parts
1.edelbrock stepped race headers with a 3 1/2 in y-pipe.
2.all stock interior parts.
3. M6 wiring harness and computer
4.altinator ,starter, ps pump,coil packs,water pump
5. billingsley racing quick disconnect steering wheel.
6. corbue black racing seats
7. FULLY built t56 with a ram 910 ,billet steel fl,mclout adj. master,02 slave,short throw shifter,and crossmember.
There are probably more parts i just cant remember.
Alls this car needs is a nice built motor and it's ready for whatever...I simply dont have the money to build it right now and i'm sick of paying the payment on something to watch it sit .. The car is nice and has a clear car fax ..I knew the previuos owners. You might have heard of "Lanes true duals"..If so thats the man that bought this car new from the lot..The chassis was built by wolfe himself..Everything on the car is in like new condition..Might be a little more than your looking to spend on a roller just kinda depends on what your wanting to do to it and if this car reflects what you had in mind for the finished project - a motor..
out side apperance:
1.sunoco pin on hood (not installed yet but will be soon,i have the paint for it and to blend the front fenders and bumper cover).
2.SS spoiler
3.halo headlights, and clear corners
4.Draglight wheels.15x10's in the rear with 28 10.5 w tires
5.tinted windows
Chassis/suspension
1.wolfe 10pt cromoly cage with thru the floor subframe conectors.has window net aswell.(installed by wolfe himself).
2.BMR k member and Lower a-arms
3.KYB adj. shocks all the way around with a eibac prokit.
4.Wolfe lca's and phr.
5. edelbrock t- arm
6.Strange 12 bolt with 373's(has a aluiminam cover and relocation brackets welded on)
7. LG rear swaybar
Other parts
1.edelbrock stepped race headers with a 3 1/2 in y-pipe.
2.all stock interior parts.
3. M6 wiring harness and computer
4.altinator ,starter, ps pump,coil packs,water pump
5. billingsley racing quick disconnect steering wheel.
6. corbue black racing seats
7. FULLY built t56 with a ram 910 ,billet steel fl,mclout adj. master,02 slave,short throw shifter,and crossmember.
There are probably more parts i just cant remember.
Alls this car needs is a nice built motor and it's ready for whatever...I simply dont have the money to build it right now and i'm sick of paying the payment on something to watch it sit .. The car is nice and has a clear car fax ..I knew the previuos owners. You might have heard of "Lanes true duals"..If so thats the man that bought this car new from the lot..The chassis was built by wolfe himself..Everything on the car is in like new condition..Might be a little more than your looking to spend on a roller just kinda depends on what your wanting to do to it and if this car reflects what you had in mind for the finished project - a motor..
08-10-2007, 07:23 PM
#6
Launching!
Join Date: May 2007
Location: Karnes City, Texas
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
I found this one on the San Antonio craigslist. It's an '03 Camaro SS roller. I think it's over at Lethal Performance, not to sure though. Give 'em a call. http://sanantonio.craigslist.org/pts/392955273.html
08-10-2007, 07:25 PM
#7
TECH Resident
iTrader: (7)
Join Date: Sep 2005
Location: DFW, Texas
Posts: 886
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GunshotZ28
I found this one on the San Antonio craigslist. It's an '03 Camaro SS roller. I think it's over at Lethal Performance, not to sure though. Give 'em a call. http://sanantonio.craigslist.org/pts/392955273.html
Trending Topics
08-10-2007, 08:35 PM
#8
Launching!
Join Date: May 2007
Location: Karnes City, Texas
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Haha, Damn I didn't even notice that. I was kinda distracted at the time. I had another tab open and I was looking at some pictures of my friends '03 Mach 1. I didn't even catch it at the time knowing they stopped with f-bodys in '02.