hole in intake port on head
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Ohio
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
hole in intake port on head
I never really looked at the heads before but when I got them back from Absolute Speed I noticed that every intake port had a hole in it where the rocker bolt comes down through. Is this supposed to be like this? The heads flow good though.
#3
TECH Junkie
Join Date: Nov 2001
Location: Los Angeles
Posts: 3,604
Likes: 0
Received 0 Likes
on
0 Posts
Re: hole in intake port on head
Yes, that is normal. Put a little locktite on the intake rocker bolts when you put them in. It'll kinda act as a sealant to keep oil from dripping down through the threads and into the intake.
#6
TECH Fanatic
Re: hole in intake port on head
All of my intakes look like that on my 5.3L heads. TEA recommends applying black silicon sealant to the intake rocker bolt threads prior to installing.