phoenix1987

iTrader: (3)

I am about to install a LS6 valley cover and do the Ls6 PCV mod. I have 98 valve covers and have no idea how to route this new PCV system, as I do not have one now.. I do have a metco breather, mounteed on the drivers side. A friend told me to run a hose from the ls6 valley cover to the intake. If I do this this, do I need to install a PCV valve between the valley output and the intake? Should I connect the valley cover outlet to the intake or throttle?


Sorry for all of the questions, just a little confused.


I will not be running a catch can either. Not until winter mods come into play anyway,

warp10

iTrader: (5)

You can block both sides of the valve covers. You will now get the PCV pressure from the valley instead of the valve cover area.

mzoomora

iTrader: (36)

Check LS1howto.com, they explain the whole thing and have pictures.

sroach20

iTrader: (31)

you need to run a pcv in between. the hose goes into the intake. the throttle body is what goes to the tube on the front of the passenger side valve cover.