Javier97Z28

iTrader: (1)

Can anyone get me some pictures of where the over the seat bars typically mount in the rear. Not when they mount on the flat area over the gas tank, but when they angle out to where the speakers in the rear hatch panels are. I need the actual pictures of the contact point of the cage to the car metal.. not the through plastic picture

Thanks!

If you don't have them online please email to javiert99 @ gmail.com

TheOutlaw

Put the rear bars over the rear spring perch area/ shock area.. Not over the wheel well area that has no support.

Javier97Z28

iTrader: (1)

Any pics of this? I imagine this 100% requires eliminating the rear seats.. which I planned to do, but wanted to leave the option of putting them back in.. I can live w/o them though.

JL ws-6

iTrader: (50)

http://www.mainstreamtopics.com/~scr...%20Ws6%20Pics/

That's the best place to put the bars, right on the frame in the back. I hacked the plastic on the passenger's sideas can be seen in one pic, but I have another piece to do over, just haven't gotten to it yet.

Demonicbird00

iTrader: (17)

JL what bar is that? i def like that better then through the speakers and the top flat part.

were you able to keep th fuel tank in while welding back there?

thanks
brandon

JL ws-6

iTrader: (50)

Fuel tank stays in, and that is the rollbar my chassis guy fabbed up. It's not a kit that's available anywhere, he bent it up himself

If you want to take a ride to CT, I can get you his contact info.

Javier97Z28

iTrader: (1)

Thanks JL, the chassis guy I'm taking the car to has done alot of 4th gens around here. I'll bring him a pic of the rear bars to see what he thinks.

JL ws-6

iTrader: (50)

No problem. Only issue is cutting the plastic on the passenger's side, but It hink if the bar was shifted a little bit the process would be easier.... but they were done so they are centered, the trunk I guess is not because of the spare tire area.

badpewter-z

iTrader: (4)

heres mine as i wanted to keep full use of the t-top storage and not cut any plastic





its all custom as thats kinda the best way to go these days it seems to get what you want

JL ws-6

iTrader: (50)

it's the only way to get exactly what you want really.

WizeAss

iTrader: (5)

4SFEDZ

iTrader: (6)

what are 6 points good to time wise?

Fireball

iTrader: (21)

11.49 - 9.99