Supercharges belts
#1
TECH Fanatic
Thread Starter
Join Date: Jun 2002
Location: kuwait
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
Supercharges belts
Hi everyone, i'm looking for a good company offering any size of belts for supercharges like 8, 10, 12 Ribs so what's your advice for me?
Thanks in Advance
Thanks in Advance
#4
9 Second Club
118mm is like 4 5/8" long.
I highly doubt anyone is going to make a 12 rib that length.
If however you mean 1180mm, ie 46.5 inches, you have a chance.
The rough part number for a 12 rib 1180mm would be 12PK1180, if indeed it does exist. 12 obviously being 12 rib, PK is the groove pitch, and 1180mm the length.
pm sent with an email contact.
US part number would be something like K120465
If you could drop to a 10...it will open up a LOT more belt length options.
I highly doubt anyone is going to make a 12 rib that length.
If however you mean 1180mm, ie 46.5 inches, you have a chance.
The rough part number for a 12 rib 1180mm would be 12PK1180, if indeed it does exist. 12 obviously being 12 rib, PK is the groove pitch, and 1180mm the length.
pm sent with an email contact.
US part number would be something like K120465
If you could drop to a 10...it will open up a LOT more belt length options.
Last edited by stevieturbo; 10-20-2007 at 09:53 AM.