My new ETP 255's
Yeah I am still running the 6.0 block. I thought about getting the six bolt for later but was kinda on a time table. So didn't have time. EPT told me I could send them back later and they could weld the tabs on if I want.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
How much are the rocker stands and do they come with the heads???
Are the rocker stands needed for the Comps?? Im looking at using them.
How much do they charge you to weld the tabs on later???
Kyle
Yeah i went on there site and saw the stand were around $100.
Now if the heads you have bought are say a 72cc chamber and later on ya want the tabs welded on..... wont they have to mill the deck of the heads?? ie so the chambers will get smaller??
Now if the heads you have bought are say a 72cc chamber and later on ya want the tabs welded on..... wont they have to mill the deck of the heads?? ie so the chambers will get smaller??
Head's look great. They are definatly a big step up from the patriot's!
Those patriot's have the same deck height as my dart's I believe. My AFR's will hopefully help eliminate the water pushing also! congrat's on the new head's!
Those patriot's have the same deck height as my dart's I believe. My AFR's will hopefully help eliminate the water pushing also! congrat's on the new head's!
TECH Enthusiast
Joined: May 2007
Posts: 538
Likes: 0
I have never bought a set of ETP lsx heads without stands. Usually most vendors include them in the purchase price.
What tabs are you reffering to ? I personally would pass on the Comp rockers unless you plan on runnign Morel lifters. The rocker is so heavy it really make the spring selection dicey. My advice would be to call ET and talk to Craig.
What tabs are you reffering to ? I personally would pass on the Comp rockers unless you plan on runnign Morel lifters. The rocker is so heavy it really make the spring selection dicey. My advice would be to call ET and talk to Craig.