Jorday

I have a MTI S2 heads/cam car and the exhaust setup is currently mac headers, orp, flowmaster collector and SLP dual/dual exhaust, I don't have a cutout.

The exhaust setup that I'm looking at is the QTP stainless 1 7/8 longtubes with a 3 inch x pipe setup with dumps before the axle. I may even order the merge collectors on the headers.

What do you think would be the approximate gains from this setup over what I have? It seems like it would be worth some good power.

Thanks
Jordan

mike c.

iTrader: (1)

i only live about 15min away from you.i have a 01 ws6 head and camed car,maybe we should get to get togeather some time.

-PEPE-

iTrader: (10)

I'd say about 20-22 rwhp and easily 3/10ths on a good cool evening for 1/4 ET. These were my numbers for the Jethot LT's and 3" ypipe no cats with the Borla.

Jorday

mike,
sure man, where do you live? we should definately meet up somewhere. What kind of heads and cam do you have?

brett,
you gained 20 hp over macs by switching to jet hot headers and 3 inch y pipe?

Jordan

Iv_z28

I'm pretty sure you confused those gains with the switch from stock manifolds.

mike c.

iTrader: (1)

jorday,i have an a.r.e block,(any day now)ported heads,c1 hammer,all the boltons,12bolt w/3.73's(going to 4.10's)suspencion mods.if you e-mail we can swap phone #'s and meet at the genesee valey or something.