Going from Juice to Boost......help
#1
Going from Juice to Boost......help
Hello I am new to boosted ls1 but I am growing more interested.
I currently have a Nitrous car but I am tire of filling bottle after bottle, worrying about pressure, and running out in middle of races.
The power I made with nos is in the signature.
I want to go single turbo and reach about 500-600 rwhp w/ Tune
This is what I have:
98 z28 M6 92000 miles
255 Walbro pump
42 # injectors
Granatelli Maf
Cartek 2x cam 224/228 590/590 113lsa
918 springs
Thunder racing pushrods
ls1 intake
ported TB
Ported Heads(not milled)
160 thermostat
EGR/EVAP/Air system removed
This is a list that I think I need, if I need anything else or if there is anything else I should know please add on. All the piping will be fab by a shop
Turbo t72 - t76 (Whats the best size for me)
Wastegate 38-40 mm
Exaust piping- Fabricated
Cool piping- fabricated
Intercooler
OIl piping
How much PSI should I run?
Any weak Vaccum hoses I should worry about?
Should I turn the NOS to an intercooler sprayer?, any gains or that or just sell the kit.
I currently have a Nitrous car but I am tire of filling bottle after bottle, worrying about pressure, and running out in middle of races.
The power I made with nos is in the signature.
I want to go single turbo and reach about 500-600 rwhp w/ Tune
This is what I have:
98 z28 M6 92000 miles
255 Walbro pump
42 # injectors
Granatelli Maf
Cartek 2x cam 224/228 590/590 113lsa
918 springs
Thunder racing pushrods
ls1 intake
ported TB
Ported Heads(not milled)
160 thermostat
EGR/EVAP/Air system removed
This is a list that I think I need, if I need anything else or if there is anything else I should know please add on. All the piping will be fab by a shop
Turbo t72 - t76 (Whats the best size for me)
Wastegate 38-40 mm
Exaust piping- Fabricated
Cool piping- fabricated
Intercooler
OIl piping
How much PSI should I run?
Any weak Vaccum hoses I should worry about?
Should I turn the NOS to an intercooler sprayer?, any gains or that or just sell the kit.
#2
Launching!
Join Date: Apr 2007
Location: lynchburg va
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
sell the nitrous kit spraying the intercooler is a waste....one of the many turbo masters will come in here and get you on track...good luck with the build, I switched from nitrous to turbo and I would never go back....
#5
+1 sell the n2o. I was where you are also. Your going to love the power on tap all the time.
I'd go 76mm, maybe a Tc76 from F.I. I know people have been having good luck with them, and they're cheap. I'd go to some 60lb injectors too. The single pump should be o.k., but maybe a return line with a FPR, boost referenced. I like to over build, but that's just me.
I'd go 76mm, maybe a Tc76 from F.I. I know people have been having good luck with them, and they're cheap. I'd go to some 60lb injectors too. The single pump should be o.k., but maybe a return line with a FPR, boost referenced. I like to over build, but that's just me.
#6
9 Second Club
iTrader: (2)
Join Date: Jun 2005
Location: Reston, VA
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
Are you looking for a custom kit or a "off the shelf"... your power goals can be eaisly reached by any turbo kit out there... to include even a T-68 STS setup. Make sure you read the sticky about "the real cost of FI" on the top of the board so you know what your getting into. FI is the best... and most expensive money pit there is.
We addicts know it!
We addicts know it!
Trending Topics
#8
Are you looking for a custom kit or a "off the shelf"... your power goals can be eaisly reached by any turbo kit out there... to include even a T-68 STS setup. Make sure you read the sticky about "the real cost of FI" on the top of the board so you know what your getting into. FI is the best... and most expensive money pit there is.
We addicts know it!
We addicts know it!