memcgraw

Putting a FAST intake on my 02 SS and sorting out the items that were mounted on the drivers side of the intake. I've read the posts on the "Evap Relocation Mod" so I think I have a plan there.....but had a question on the AIR system.

I am planning on keeping it. Line from pump to canister on the back of the driver VC is pretty clear as then it splits between the left and right exhaust manifold. But I was curious of the layout, and function, of the switch/sensor/? that mounts on the driver rear of the intake?....and all the little hoses that go to the top of the canister, back of the intake, etc?

I'll likely just relocate the switch/sensor and route new small hoses.

Just interested in any insight/guidance here. Thanks ahead of time.

Mark M.