WTB: Ms4 cam LS6 intake and supporting mods
01-12-2008, 11:20 AM
#1
TECH Enthusiast
Thread Starter
iTrader: (36)
Join Date: Jul 2007
Location: Omaha, NE
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
WTB: Ms4 cam LS6 intake and supporting mods I am going to be buying cam and valvetrain upgrades so here is what I need let me know what u got.
Ls6 ported oil pump
Ls7 lifters
Ms4 cam
ARP Headbolts
Ls6 intake-Bought
PRC dual spring kit(new only)
Ls6 ported oil pump
Ls7 lifters
Ms4 cam
ARP Headbolts
Ls6 intake-Bought
PRC dual spring kit(new only)
Last edited by miller456; 01-13-2008 at 09:03 AM.
Trending Topics
01-13-2008, 03:36 PM
#9
i have a ms4 cam asking 385 shipped.. its brandnew in the box.. it was placed in my car for a clearance check and unfortanatly didnt pass. i have the cam card and original receipt also. pics are here https://ls1tech.com/forums/showthrea...53#post8464153
01-13-2008, 03:47 PM
#10
TECH Enthusiast
Thread Starter
iTrader: (36)
Join Date: Jul 2007
Location: Omaha, NE
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
i have a ms4 cam asking 385 shipped.. its brandnew in the box.. it was placed in my car for a clearance check and unfortanatly didnt pass. i have the cam card and original receipt also. pics are here https://ls1tech.com/forums/showthrea...53#post8464153
01-13-2008, 03:57 PM
#11
patriot stage 2 ls6 heads....the shop told me i would have been ok if i ran stock heads, but i made the same power out of the smaller cam with bigger heads so i went with the smaller cam. i wish i would have waited and done the ms4 with some afr heads though lots of power out of the combo. if u keep ur stock heads u jus have to get dual springs and good retainers and ull be ok
01-13-2008, 04:01 PM
#12
TECH Enthusiast
Thread Starter
iTrader: (36)
Join Date: Jul 2007
Location: Omaha, NE
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
yea i know i have stock 241 heads and im getting prc dual spring kit and ls7 lifters and other supporting mods. Keep in touch with me i do want it if still available.
01-14-2008, 08:39 PM
#13
hey miller sorry to have to tell ya but the cam is sold now.. i belive there was another person selling another one new in the box on here tho u might wanna take a look.. thanks for ur interest.. if the sale falls through i will def. let u know.
