Question About Drive-By-Wire Throttle Setups.
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Jan 2007
Location: Ontario, Canada
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Question About Drive-By-Wire Throttle Setups.
Hey Everyone.
Im swapping a '04 5.3L motor into my iroc, and im currently working out a throttle setup.
Ive got a drive-by-wire throttlebody here, and the harness wired for it. What do i need to make it work?
Im under the assumption i need a pedal assembly, TAC module, and a wiring setup. Where do the wires plug into?
Theres a big connector near the ECM that i know is for the cruise, however i dont want cruise anymore, so is it ok for me to delete that plug and still work the DBW TB?
Thanks for the help!
Im swapping a '04 5.3L motor into my iroc, and im currently working out a throttle setup.
Ive got a drive-by-wire throttlebody here, and the harness wired for it. What do i need to make it work?
Im under the assumption i need a pedal assembly, TAC module, and a wiring setup. Where do the wires plug into?
Theres a big connector near the ECM that i know is for the cruise, however i dont want cruise anymore, so is it ok for me to delete that plug and still work the DBW TB?
Thanks for the help!