Good Mod Choice?
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Celina, TX
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Good Mod Choice?
Hey Guys,
Was hoping I could describe my potential mod-plan and get some feedback including some cam suggestions. I have a 2000 MN6 with only a B&B cat-back. My plan includes LG Street LT’s w/X-pipe and hi-flow cats, Vararam CAI and a cam install and tune by MTI in Houston. All the valvetrain upgrades will be done along with a hi-volume oil pump, HD timing chain and an underdrive pulley. What do you think of their G1 (228/232, .588/.575 LSA 113 and X1 cams 230/227, .591/.571 LSA 112? I don’t mind a little chop in the idle but do want it to remain a daily driver and not have stalling or surging issues. I’d like the cam to hit hard throughout the rev-range and not just up top. Future mods will include an LS6 intake and a set of heads so I’d like the cam to work well with this in mind.
I’m currently deployed in Iraq and won’t be having this work done till the end of the year so I have plenty of time to research. Please include any links you think may be helpful to me. I’m already tracking LS1 Tech which has great info but could use other sources.
Thanks,
Eric
Was hoping I could describe my potential mod-plan and get some feedback including some cam suggestions. I have a 2000 MN6 with only a B&B cat-back. My plan includes LG Street LT’s w/X-pipe and hi-flow cats, Vararam CAI and a cam install and tune by MTI in Houston. All the valvetrain upgrades will be done along with a hi-volume oil pump, HD timing chain and an underdrive pulley. What do you think of their G1 (228/232, .588/.575 LSA 113 and X1 cams 230/227, .591/.571 LSA 112? I don’t mind a little chop in the idle but do want it to remain a daily driver and not have stalling or surging issues. I’d like the cam to hit hard throughout the rev-range and not just up top. Future mods will include an LS6 intake and a set of heads so I’d like the cam to work well with this in mind.
I’m currently deployed in Iraq and won’t be having this work done till the end of the year so I have plenty of time to research. Please include any links you think may be helpful to me. I’m already tracking LS1 Tech which has great info but could use other sources.
Thanks,
Eric
#2
TECH Addict
iTrader: (4)
Good choices. The LG Headers are very popular and well spoken of on here.
Cams are a personal thing. What one person thinks is streetable, may not be to the next guy, but it sounds like the G1 is in the neighborhood of what your aiming for.
BTW, if I'm not mistaken, the G1 cam uses the same lobes as LG's G5X1...
Good luck over there. Return in good health.
Cams are a personal thing. What one person thinks is streetable, may not be to the next guy, but it sounds like the G1 is in the neighborhood of what your aiming for.
BTW, if I'm not mistaken, the G1 cam uses the same lobes as LG's G5X1...
Good luck over there. Return in good health.
#6
TECH Addict
iTrader: (4)
https://ls1tech.com/forums/showthrea...t=#post8778369
He's reporting a 70 HP gain using the X1 with stock heads and an A4.