Take a Guess
03-06-2008, 01:41 PM
#1
Launching!
Thread Starter
Join Date: Dec 2007
Location: DeLaWaRe
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Take a Guess Ok so right now iam running 13.4 at 102 on street tires and an lt4 hot cam kit UNTUNED.... I have headers,ory, cutout,3.73s,a yank 3600 stall (getting ready to order) Same with some drs ,sfc,tor arm and lca with a panhard rod and to top it off with a madz28 tune... u think i can brake 12.5 after these mods are installed here in couple of weeks?????
03-06-2008, 01:44 PM
#2
Yea I think you can definetly get a 12.5. I was running 12.8's at 110mph before torque arm and 3600 stall and short shifting the cc503. The cc503 doesnt make that much more power than the hot cam plus stall converters do alot so I think you will get that.
03-06-2008, 01:47 PM
#3
Launching!
Thread Starter
Join Date: Dec 2007
Location: DeLaWaRe
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
what is all done to ur car??, or just whats in ur sig .... do u go to ceicl county???
03-06-2008, 01:52 PM
#4
12.2-3 may be pushing it full weight. I run at Atco and Maple Grove but Maple Grove is alot closer to me. I have whats in my sig plus LT's, ORY, Magnaflow, LCA's, Subframes, Torque Arm, Panhard Rod, M/T DR's, and factory Ram Air. Your definetly going to need tires so make sure to get some M/T's or something.
03-06-2008, 02:09 PM
#5
Launching!
Thread Starter
Join Date: Dec 2007
Location: DeLaWaRe
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
12.2-3 may be pushing it full weight. I run at Atco and Maple Grove but Maple Grove is alot closer to me. I have whats in my sig plus LT's, ORY, Magnaflow, LCA's, Subframes, Torque Arm, Panhard Rod, M/T DR's, and factory Ram Air. Your definetly going to need tires so make sure to get some M/T's or something.