What Gaskets are needed for Cam Instalation?
03-12-2008, 01:19 PM
#3
12 Second Club
iTrader: (49)
Join Date: May 2006
Location: College Station, Texas
Posts: 966
Likes: 0
Received 0 Likes
on
0 Posts
Also FWIW 99% of the gaskets are reusable. I just did my cam at 119k and only replaced the water pump gaskets and just cleaned and used silicone on the rest of the gaskets. I have had no problems whatsoever.
03-12-2008, 03:08 PM
#5
TECH Fanatic
iTrader: (9)
Join Date: Nov 2005
Location: Mass
Posts: 1,311
Likes: 0
Received 0 Likes
on
0 Posts
Ls1howto has a nice write up including some part #'s:
http://www.ls1howto.com/index.php?article=23
I did mine at about 110k. Even though the gaskets can be reused I replaced everything I could to be safe. I even replaced the cam retainer plate because it comes with a new lifter oil galley gasket built in.
http://www.ls1howto.com/index.php?article=23
I did mine at about 110k. Even though the gaskets can be reused I replaced everything I could to be safe. I even replaced the cam retainer plate because it comes with a new lifter oil galley gasket built in.