going from a big valve back to small valves
#1
8 SEC SLOPPY SHOT!!!
Thread Starter
iTrader: (15)
Join Date: Oct 2002
Location: lombard,IL
Posts: 1,862
Likes: 0
Received 0 Likes
on
0 Posts
going from a big valve back to small valves
I have a set of heads on my car right now that have 2.10 intake and 1.55 exaust. i'm putting a new set of heads and cam combo in my car but my question is can you put smaller seats back in the heads with a 2.02 intake valve or do these heads have to live with them big intake valves.my motor is a 347 and i know you get valve shrouding with this setup.if i can fix them i can sell them to a buddy of mine who want's them. if it's not to pricey .
#2
TECH Regular
Join Date: Nov 2001
Location: Houston, TX USA
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Re: going from a big valve back to small valves
You are probably looking at a custom set of seats to do this(not cheap). Try and find someone local that will do this for you. That is your best bet.
Good Luck,
Good Luck,