First passes of 2008, some new bests.
04-13-2008, 10:20 PM
#1
TECH Fanatic
Thread Starter
iTrader: (26)
Join Date: Oct 2003
Location: Waukee, Iowa
Posts: 1,564
Likes: 0
Received 0 Likes
on
0 Posts
First passes of 2008, some new bests. This was the first time out with the Vig 3600 & the Bogarts, I'm pretty happy with the results.
We were at KCIR, it was cold, cloudy & windy. On my best run of the day the temp was 45*, 46% humidity & there was about a 10mph straight on headwind, the DA looks to have been -296.
My previous best was 11.70 @ 117.
Run #1 11:53 AM
Right as I drove it there, not a big enough burnout...Throw away run!
Run #2 12:08 PM
Right as I drove it there (17" ZR1s w/ MT radials, closed cutout)
60' 1.602
1/8 7.369 @ 92.83
1/4 11.594 @ 116.76
Run #3 2:09 PM
Switched to the Bogarts & brand new 275-50-15 MT Radials & opened the cutout.
60' 1.533
1/8 7.209 @ 93.72
1/4 11.393 @117.78
Run #4 2:32 PM
60' 1.775
1/8 7.532 @ 93.24
1/4 11.732 @ 117.49
Run #5 2:58 PM
60' 1.530
1/8 7.219 @ 93.90
1/4 11.393 @ 118.03
Run #6 4:02 PM
60' 1.514
1/8 7.214 @ 93.41
1/4 11.417 @ 117.23
Run #7 4:23 PM (Probably had less gas than I should have made a pass with)
60' 1.552
1/8 7.292 @ 92.93
1/4 11.509 @ 116.92
It was a good way to start the season, got some good runs in & drove the car back home 200 miles without any problems.
We were at KCIR, it was cold, cloudy & windy. On my best run of the day the temp was 45*, 46% humidity & there was about a 10mph straight on headwind, the DA looks to have been -296.
My previous best was 11.70 @ 117.Run #1 11:53 AM
Right as I drove it there, not a big enough burnout...Throw away run!
Run #2 12:08 PM
Right as I drove it there (17" ZR1s w/ MT radials, closed cutout)
60' 1.602
1/8 7.369 @ 92.83
1/4 11.594 @ 116.76
Run #3 2:09 PM
Switched to the Bogarts & brand new 275-50-15 MT Radials & opened the cutout.
60' 1.533
1/8 7.209 @ 93.72
1/4 11.393 @117.78
Run #4 2:32 PM
60' 1.775
1/8 7.532 @ 93.24
1/4 11.732 @ 117.49
Run #5 2:58 PM
60' 1.530
1/8 7.219 @ 93.90
1/4 11.393 @ 118.03
Run #6 4:02 PM
60' 1.514
1/8 7.214 @ 93.41
1/4 11.417 @ 117.23
Run #7 4:23 PM (Probably had less gas than I should have made a pass with)
60' 1.552
1/8 7.292 @ 92.93
1/4 11.509 @ 116.92
It was a good way to start the season, got some good runs in & drove the car back home 200 miles without any problems.
Last edited by Unstang; 04-28-2008 at 12:27 AM.
04-14-2008, 09:03 PM
#6
TECH Fanatic
Thread Starter
iTrader: (26)
Join Date: Oct 2003
Location: Waukee, Iowa
Posts: 1,564
Likes: 0
Received 0 Likes
on
0 Posts
Thanks everyone!
I'm on the original 4L60 & a 10 bolt with an Eaton, Motive gears, Moser axles, TA girdle & welded axle tubes..Fingers crossed on every launch!
Sean, a bunch of us are heading out your way for the Speed Inc open house--the same weekend as the relays. Bad timing!
I'm on the original 4L60 & a 10 bolt with an Eaton, Motive gears, Moser axles, TA girdle & welded axle tubes..Fingers crossed on every launch!
Sean, a bunch of us are heading out your way for the Speed Inc open house--the same weekend as the relays. Bad timing!
04-18-2008, 10:57 AM
#7
TECH Fanatic
Thread Starter
iTrader: (26)
Join Date: Oct 2003
Location: Waukee, Iowa
Posts: 1,564
Likes: 0
Received 0 Likes
on
0 Posts
Here is a launch pic from Sunday, I'm pretty sure this was a 1.53 60'.
http://www.1320video.com/gallery/Mid...out08/IMG_9576
http://www.1320video.com/gallery/Mid...out08/IMG_9576
Trending Topics
04-28-2008, 12:26 AM
#8
TECH Fanatic
Thread Starter
iTrader: (26)
Join Date: Oct 2003
Location: Waukee, Iowa
Posts: 1,564
Likes: 0
Received 0 Likes
on
0 Posts
A few runs from the outing...
http://www.youtube.com/watch?v=ghrX1nsytd8
http://www.youtube.com/watch?v=5p2A3XYMcjk
http://www.youtube.com/watch?v=ghrX1nsytd8
http://www.youtube.com/watch?v=5p2A3XYMcjk