Won't rev over 6100
#1
Teching In
Thread Starter
Join Date: Jul 2007
Location: WHITEHOUSE, OHIO
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Won't rev over 6100
Ok got my new car dynoed over the weekend. Everything went great except the car would not rev over 6100. At 6100 it was like the car hit a brick wall. The upgrades are ls6 intake, lid, Long tubes, full 3" no cats, 1.85 rockers, and hardened push rods. Nothing was showing up with the tune or the data log. Fuel,spark,timing,injectors were all good. The only thing we didn't know about was if the previous owner changed valve springs when he put the rockers and pushrods in. Let me know please what you guys think.
#7
Teching In
Thread Starter
Join Date: Jul 2007
Location: WHITEHOUSE, OHIO
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#10
Teching In
Thread Starter
Join Date: Jul 2007
Location: WHITEHOUSE, OHIO
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
#11
11 Second Club
iTrader: (1)
Join Date: Oct 2005
Location: Ms
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
I had the same thing happen with my old 5.3L, at 6200 seemed as though is was hitting a brick wall. I did kiss some pistons, no bent valves and ran it for a couple more months. Problem was caused by not enough seat spring pressure.