what do i need to make 500 hp?
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Fresno CA
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
what do i need to make 500 hp?
guys always tell me i cant make 500 hp on a n/a motor.
can you tell me what i need to prove them wrong? i have slp longtubes coming this week. what plus that will work?
can you tell me what i need to prove them wrong? i have slp longtubes coming this week. what plus that will work?
Trending Topics
#8
#9
TECH Apprentice
iTrader: (11)
Join Date: Jul 2005
Location: NWburbs of Chicago
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/generation-iii-internal-engine/732392-recipe-500-rwhp-heads-cam.html
This is probably the best advice you can get.
This is probably the best advice you can get.
#11
My friend has afr 205 heads with a matched cam running an ls6 manifold an made 500whp along with full boltons through a 12 bolt with an automatic so it can be done.....granted he has lots of money so i assume it wasnt cheap.
#13
TECH Fanatic
iTrader: (8)
Really good heads (AFR, TFS, etc.)
A pretty large cam that compliments your setup
A well ported intake and TB (FAST 92 setup)
All the bolt ons to accompany (full exhaust, ewp, pulley, etc.)
and a relatively friendly dynojet.
It is certainly possible (there are a few guys here that have accomplished it), however it might take a bit of work (and cash) to get the stars to align!
A pretty large cam that compliments your setup
A well ported intake and TB (FAST 92 setup)
All the bolt ons to accompany (full exhaust, ewp, pulley, etc.)
and a relatively friendly dynojet.
It is certainly possible (there are a few guys here that have accomplished it), however it might take a bit of work (and cash) to get the stars to align!
#19
TECH Fanatic
iTrader: (3)
Join Date: Jun 2004
Location: Dayton, OH
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
The only 346 combo that I have seen pull off around 500rwhp multiple times is the TFS heads with Vindicator Camshaft and a ported FAST intake.
If you are serious about this, then get ahold of Ron at Vengeance.
If you are serious about this, then get ahold of Ron at Vengeance.
#20
TECH Fanatic
iTrader: (6)
I would not worry about how much power you can put down, but you need the right combo and what can it do in the quarter mile. I ve heard of people making 500 rwhp and people with 450 475 rwhp blowing them away. There cars running like rapped apes. Its all about the right combo. But if you like bragging rights, I guess that is cool too. Just try to keep the main thing the main thing.